-
product
Intelligent Test Automation
Tricentis Tosca optimizes and accelerates end-to-end testing of your entire digital landscape. Its codeless, AI-powered approach accelerates innovation across your enterprise by taking the bottlenecks out of testing and the risks out of software releases.
-
product
Exchangeable Test Fixture
MA 2111/D/H/S-5
Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 850Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 9,30 kg
-
product
Wireless Test System
WTS-80
CETECOM offers a wide range of services and solutions to help companies develop and execute product testing plans to determine a product’s compliance status and master the increasingly complex regulatory issues of the international market.
-
-
product
Portable Test System
MT786
Actual value, vector, curve displayCurrent and voltage generationerror measurementMeasurement of harmonics up to the 40th
-
product
Automatic Relay Test Set
DRTS 64
DRTS 64 is the most powerful diagnostic test set designed to perform accurate tests on protection relays, transducers, energy and power quality meters. This advanced test equipment is also thought to satisfy all the needs related to commissioning and substation maintenance. 6 Current and 4 Voltage generators simultaneously available.
-
product
Test Receiver
FSWT
The R&S®FSWT is the right tool for detecting compromising emanations. With two equivalent, switchable RF inputs, up to 500 MHz measurement and analysis bandwidth and two analog outputs for video voltage and demodulators, the R&S®FSWT fits perfectly into typical test setups and easily replaces older instruments.
-
product
Radiated Immunity Test System
Beijing KeHuan Century EMC Technology Co,.LTD
Radiation Immunity Test System.
-
product
Compression Test Apparatus
CT-20 C
Is designed to perform tests specified in many standards where resistance of insulating materials to elevated operating temperatures is to be determined. It is used to test insulation materials used in Electrical Appliances, Electrical wiring accessories, luminaires, motors, connectors, etc. The test ensures that external parts of insulating material, the deterioration of which might cause the appliance to fail to comply with the relevant standards, are sufficiently resistant to heat
-
product
Die Test Handler
3112
Chroma 3112 is a productive pick & place handler for high volume single- or multi-site bare die testing.
-
product
10 MHz To 54 GHz LAN Wide Dynamic Range Average Power Sensor
L2056XA
Accurately measure any modulated signal with the Keysight Technologies, Inc. U/L2050/60 X-Series wide dynamic range power sensors. The USB/LAN connectivity models come with a wide dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with a super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the in...show more -
product
High-Voltage Test Device
PGK 110 HB
BAUR Prüf- und Messtechnik GmbH
Cable testing and diagnostics with the BAUR PGK HB. There are hardly any other longer-lasting, more robust and cost-effective testing devices than the two-piece high-voltage test devices from the PGK HB series. They generate continuous adjustable test voltages with mains frequency or optionally DC with positive or negative polarity. The display instruments for current and voltage, the safety control unit and the regulating transformer for the voltage are integrated in the operating unit.* Testin...show more -
product
Extendible Test Leads
The Extendable Tip Probe permits testing in those hard to reach areas. The tips are fully insulated with durable Kynar. This prevents accidental shorting of adjacent components. The tip is stainless steel and is very sharp, allowing for penetration of conformal coatings. The rubber lead is 18 gauge, 48" long.
-
product
RF Test and Measurement Solutions
Signal GeneratorsSwitch MatricesProgrammable AttenuatorsControl ProductsSignal MeasurementModular Test SystemsCustom Test SystemsUser-Friendly Control Software
-
product
Tan Delta Test System
Precision measuring bridge is designed for determining the capacitance and dielectric dissipation factor of liquid and solid insulants, cables, capacitors, line transformers, generators, motors, bushings etc. Furthermore it can also be used for power loss measurement on shunt reactors or similar apparatus. This system is suitable for both low and high voltage measurement at line frequency. Measurement reports can be printed. This measuring equipment has been specially developed to maximise efficiency in production and quality control environments. Its outstanding accuracy also makes it suitable for laboratory and research applications.
-
product
Multi-Platform Vehicle Test Set
Kratos Defense & Security Solutions, Inc.
The Multi-Platform Vehicle Test Set (MPVTS) is a self-contained portable equipment rack test instrument for performing vehicle electrical system verification. A custom MPVTS software application can be designed specifically to perform complete pre-mission verification of your airborne, ground, or marine vehicle. The MPVTS is the first test set designed to be completely vehicle platform independent.
-
product
Forensics Test & Analytical Solutions
Science and technology are playing an increasing role in the investigation and prosecution of crime. Technology innovation, automation, databases and good laboratory practices are essential to the pursuit of justice and are critical to the appropriate collection, assessment, and application of evidence in the criminal justice system. Forensic Toxicology, Antidoping, Forensic DNA Analysis, Controlled Substances, Trace Evidence Detection, Suspicious Documents, LIMS for Forensics Labs, Forensics Resource Library, Human Identification.
-
product
Test Data
Studies by major universities were conducted in response to a request from the military, scientific and engineering communities for scientific validation of claims that Pulse Technology actually improves battery efficiency and lengthens battery life. PulseTech contracted with Oakland University in Rochester, Michigan and Ohio State University in Columbus, Ohio to conduct separate evaluations of the technology. These extensive evaluations began in the summer of 1998 and concluded in the fall of 2000.
-
product
Avionics Interfaces & Test Instruments
ARINC 664
Avionics Interface Technologies
AIT’s ARINC 664 test instruments can be used in test and simulation applications that are required to transmit and receive data over the ARINC 664 avionics databus. AIT’s instruments use small form-factor pluggable transceivers (SFP) and support copper or fiber optic physical network interfaces.Using an FPGA based architecture, with multiple embedded processors, the ARINC 664 instruments provide onboard support for upper layer protocol processing (A653, UDP, IP) and utilize DMA to provide optimal data throughput. All ARINC 664 protocol operations, including VL traffic shaping, redundancy management, and IP fragmentation and reassembly, are handled onboard.
-
product
CMOS/CCD Production Test System
System 1828
The basic system consists of a 225 MHz pattern generator, 10 clock drivers, 6 DC biases, 1-4 channels of 10 MHz 14 bit analog data acquisition and/or 1-4 channels of digital acquisition. Additional options can be added to customize the system to meet your requirements.
-
-
product
High Voltage Test Equipment
A hipot test is conducted by ensuring no current flows from one point to another on a circuit. A hipot test will take two conductors that should be isolated from one another and passes a high voltage between the two points. The current which flows between these points is then measured. If too much current flows, this would indicate that the points are not well isolated and the test will fail.
-
product
METES - Meter Test Systems
Dramatic advances in the field of measurement technology and the use of state-of-the-art micro-electronics have led to the development of a new generation of electricity meters which are far more accurate than their predecessors of just a few years ago. As well as measuring the exact amount of energy used, a high level of integration enables electronic meters to perform a number of additional functions. As a result, these meters are also more sensitive to network irregularities. This means that regular testing is the only way to ensure that a meter functions correctly, both during final factory tests and during the entire life span of a meter.
-
product
DC 600A Clamp Meter,Auto range
ST-600
Measuring Range: 0 - 600A DCDisplay: 6000 countsAuto range: 60A/600AResolution: 10 mA in 60A range 100 mA in 600A rangeBasic Accuracy with Conductor Central in Jaws: ±1.3% rdg ±1 digitEarth Magnetic influence: ±10mA @50mA in 60 A range (not Including zero offset)Temperature coefficient: 0.2%of rdg /°CFrequency range: DC current onlyOverload capacity : 10,000AMax jaw Opening: 35mm maxPower Supply: 9V alkaline batteryDimensions: 196mm（L）× 71mm（W）× 33mm（H）Weight: 184g
-
product
Universal Test System
LEON System
A universal ICT, FCT, ISP and Boundary Scan platform.Based on the ABex platform, which directly integrates Konrad analog bus technology and PXI/PXIe in one chassis, the LEON platform can be configured to solve various test challenges. Due to this architecture only one system provides the complete test flow combining ICT, ISP, Boundary Scan and FCT.Various form factors and configurations allow a perfect combination between cost, speed and test coverage. The modular architecture provides the possi...show more -
product
Functional Test
Functional test systems offer users the ability to test boards in a real world environment, checking that they function as designed by stimulating inputs and monitoring outputs. Often whole suites of boards have similar functions and this is where a generic functional tester offers large benefits over more bespoke solutions.
-
product
Automotive EMC test systems
Dozens of manufacturer's and other automotive immunity standards with their roots in ISO 7637 continue to evolve bringing new challenges to users of conducted immunity testing. Teseq continues to advance the state of the art, bringing simple, flexible solutions for the challenging and fast-changing requirements that are 42 V ready.Teseq has been at the forefront of the pioneering work to establish EMC tests for motor vehicle electronics. Automotive manufacturers and suppliers worldwide have come to trust test systems from Teseq. Active involvement in the standardization committees ensures that the latest advances are continously reflected in our test systems.
-
product
Test Contactor/Probe Head
Hydra
Engineered for excellence and efficiency, Hydra™ spring probe series offers precision, reliability, and standardized semiconductor test interface.Designed to be best-in-class at a competitive price point, Hydra is optimized to maximize your operational efficiency. Hydra is built to withstand demanding high-volume manufacturing test environments with its robust and durable design.With a common test-height, Hydra offers the ability to mix and match power, RF, and Kelvin probes within the same test socket. In addition, Hydra streamlines inventory management with fewer probe part numbers to manage and shorter lead times.
-
product
Online Programming Test
Landrex Technologies Co., Ltd.
MH Flash Runner I/II/III series, the best solution for MCU mass production programming, whether you want many-to-many (multiple brands and multiple programs), one-to-many (one brand and multiple programs) program) or one-to-one (one label and one program), we can meet the needs of your production line. At the same time, the optional Flash Runner Cube is specially designed for multi-connection boards (simultaneous programming of multiple MCUs), shortening your programming time.
-
product
Physical Test Equipment
When assessing a coating for suitability for a particular application the testing of the physical properties such as bendability, impact resistance, hardness, washability and abrasion resistance are all required to provide information for decision making. Testing of the pigments using fineness of grind gauges, determining the specific gravity of the coating using density cups, measuring the viscosity using viscosity cups or rotational viscometers and assessing the drying time all provide information for the coating technical data sheets.
